Cast Iron Copper muffler valve (aetv One-way valve) 

 1 Cast Iron Copper muffler valve (aetv One-way valve): generally applicable to pure media, should not be used to contain solid particles and the viscosity of the medium. 
 2. DN50mm the following low-pressure check valve for (aetv One-way valve):, should use butterfly valve, check valve and diaphragm vertical lift check valve; for DN greater than 200mm, less than 1200mm of in the low-pressure check valve, should use non-return valve on the ball wear; for DN larger than 50mm, less than 2000mm of low pressure check valve, butterfly valve, and should use diaphragm check valve. 
 3. Diaphragm valve for easy to produce water hammer piping, membrane can eliminate media generated when upstream water hammer, but by the temperature and pressure limits are generally used in low-temperature pipe. 4, for demanding the closure of the impact is relatively small when the water hit, or hit the water pipe, should use slow gentle closing swing check valve butterfly valve closed. 
 4. HC41T-16 cast iron copper muffler valve Product Overview 
 Iron copper muffler valve for water supply and drainage, the valve at both ends of the central axis of the use of import-oriented, flexible, open and close, can be installed horizontally or vertically. Using spring-loaded valve, which can effectively eliminate the rapid closure of the water hammer, good sealing performance, turn off noise. It has small size, light weight, fluid resistance, fatigue resistance, long lifetime. 
 HC41T-16 cast iron valve main technical parameters of copper silencer 
 Nominal pressure: 1.0 ~ 1.6MPa 
 Nominal by: 40 ~ 600mm 
 Medium: water and weak corrosive fluid 
 Temperature: 0 ~ 80 ℃ 
 Flange Standard: GB / T 17241.6 GB / T 9113 
 Test Standard: GB / T 13927 AP 1598 bar code information: 
 H41T steel pump check valve before the muffler copper main technical parameters: 
 Model Nominal pressure 
 PNMPa test pressure PSMPa temperature 
 ℃ Medium 
 Housing seal 
 H41T 1.0 1.5 1.1 ≤ 80 clean water 
 1.6 2.4 1.76 
 2.5 3.75 2.75 


 ◆ H41T steel pump check valve before the muffler copper main dimensions: 
 Model H41X H41H-P H41H-T 
 DNmm 40 50 65 80 100 125 150 200 250 300 350 400 450 500 
 L 112 120 130 150 165 190 210 255 310 362 380 450 545 580 

 These are the [copper cast valve silencer HC41T-16] for more information if you have [cast iron copper muffler valve HC41T-16] price, make, model, pictures have any questions, please contact us [cast iron valve for copper silencer HC41T-16] for the latest information. 
 [Welcome to Shanghai and Shanghai to buy tailor-made water valve]!